Fujitsu 9400 Printer User Manual


 
3-17
Binding cut sheets:
When using carbonless or carbon-backed paper, be sure forms are pasted at the top. Paste must be applied
evenly and must not cause wrinkles, creases, or discoloration.
Binding carbon-interleaved multipart paper (continuous forms only):
Process carbon-interleaved multipart paper as follows:
Paste each carbon to the paper at the left and right margins at spots other than sprocket hole areas.
Paste each carbon to the paper at the left and right margins including the sprocket hole areas while aligning
the carbon’s sprocket holes with those of the paper.
Perforations:
Poor or incomplete horizontal and vertical perforations cause paper jams. The tie-to-cut ratio for both types of
perforation must be 1 to 3.
Glued top of sheets
Feed direction
Vertical
perforation
Horizontal
perforation
Cut
3 mm
(0.12 in.)
Tie
Paper
edge
1 mm
(0.04 in.)
Tie
1 mm
(0.04 in.)
The paper edge must be tied.