Filter
Top Products
5-31
Command
4.
5.
6.
Move to dot line (d
1
+ d
2
× 256)/360
(*1)
inch
n1 = 2, n2 = 0
(0 < d1 < 255) (0 < d2 < 127)
Vertical relative move by (d1 + d2 × 256)/360
(*1)
inch
n1 = 2, n2 = 0
(0 < d1 < 255) (0 < d2 < 127)
–32768 < d1 + d2 × 256 < 32768
Page formatting
Set right margin to column n (1 < n < 255)
Set left margin to column n (0 < n < 255)
Set top and bottom margins from top of page
n1 = 4, n2 = 0
• Top margin = (t1 + t2 × 256)/360
(*1)
inch
(0 < t1 < 255) (0 < t2 < 127)
• Bottom margin = (b1 + b2 × 256)/360
(*1)
inch
(0 < b1 < 255) (0 < b2 < 127)
Set perforation skip by n lines (1 < n < 127)
Perforation skip off
Set page length to n lines (1 < n < 127)
Set page length to n inches (1 < n < 22)
Set page length to (d1 + d2 × 256)/360
(*1)
inch
n1 = 2, n2 = 0
(0 < d1 < 255) (0 < d2 < 127)
Character set control
Select character set 1
Select character set 2
Select character set table
n = 0: Italics character set
1: Graphics character set
2: Download character set
3: Graphics character set
Select international character set
n = 0: USA
1: France
2: Germany
3: United Kingdom
4: Denmark 1
5: Sweden
6: Italy
7: Spain 1
8: Japan
9: Norway
10: Denmark 2
11: Spain 2
12: Latin America
ESC ( V (n1) (n2) (d1) (d2)
ESC ( v (n1) (n2) (d1) (d2)
ESC Q (n)
ESC l (n)
ESC ( c (n1) (n2) (t1) (t2) (b1) (b2)
ESC N (n)
ESC O
ESC C (n)
ESC C NUL (n)
ESC ( C (n1) (n2) (d1) (d2)
ESC 7
ESC 6
ESC t (n)
ESC R (n)
Function
*1 The value depends on the pitch set by the ESC ( U command.
The default is 1/360 inch.