Filter
Top Products
3-15
3.7.3 Multipart binding and perforations
To avoid paper jams when using multipart paper, note the following:
Binding continuous forms:
Multipart paper must be pasted or crimped (paper-stapled) at margins only. Metal staples and bar pasting must
not be used. Incorrect multipart paper may reduce print quality and make forms difficult to fold.
Procedure
(1) Point-pasting on two sides
(zigzag pasting)
Pros and cons
Preferred because:
• Forms remain flexible.
• Copy parts do not displace each other.
(2) Crimping on both sides
(double-gathered)
The greater the number of copies, the greater
the displacement.
(3) Point-pasting on one side and
crimping on the other side
Combination of (1) and (2)
76.2 mm (3 in.)
or less
Printing surface
25.4 mm (1 in.)
or less
76.2 mm (3 in.)
or less
25.4 mm (1 in.)
or less
Printing surface