Filter
Top Products
5-30
CommandFunction
Horizontal control
Space
Backspace
Carriage return
Set elite pitch
Set pica pitch
Set 15 CPI
Proportionally spaced characters on/off
(on: n = 1, off: n = 0)
Set inter-character space to n/120 inch (for draft) or n/180 inch
(for letter and proportional)
(0 < n < 127)
Set character pitch to (n1 + n2 × 256)/360 inch
(0 < n1 < 255) (0 < n2 < 4)
Select character pitch (specify unit pitch)
n1 = 1, n2 = 0
d = 10 to 19: 10/3600 inch = 1/360 inch
d = 20 to 29: 20/3600 inch = 1/180 inch
d = 30 to 39: 30/3600 inch = 1/120 inch
d = 40 to 49: 40/3600 inch = 1/90 inch
d = 50 to 59: 50/3600 inch = 1/72 inch
d = 60 to 69: 60/3600 inch = 1/60 inch
Vertical control
Line feed
Form feed
Advance paper n/180 inch (1 < n < 255)
Set line spacing to 1/8 inch
Set line spacing to n/180 inch (0 < n < 255)
Set line spacing to n/60 inch (0 < n < 127)
Set line spacing to 1/6 inch
Set line spacing to n/360 inch (0 < n < 255)
Tabulation
Horizontal tab execution
Set horizontal tabs
The values of n1 to nk in this command are the ASCII
values of the print columns (at the current character
width) where tabs are to be set.
(1 < n < 255) (1 < k < 32)
Move print position n/120
(*1)
inch (for draft) or n/180
(*1)
inch (for
letter) right from left margin.
(n = n1 + n2 × 256)
Move print position n/120
(*1)
inch (for draft) or n/180
(*1)
inch (for
letter) left or right from the current position
(n = n1 + n2 × 256)
Vertical tab execution
Set vertical tabs
The values of n1 to nk in this command are the ASCII
values of the lines (at the current line spacing) where tabs
are to be set.
(1 < n < 255) (1 < k < 16)
SP
BS
CR
ESC M
ESC P
ESC g
ESC p (n)
ESC SP (n)
ESC c (n1) (n2)
ESC ( U (n1) (n2) (d)
LF
FF
ESC J (n)
ESC 0
ESC 3 (n)
ESC A (n)
ESC 2
ESC + (n)
HT
ESC D (n1)... (nk) NUL
ESC $ (n1) (n2)
ESC \ (n1) (n2)
VT
ESC B (n1)... (nk) NUL
2.
3.
4.
*1 The valve depends on the pitch set by the ESC ( U command.