Filter
Top Products
3-2
Resolution: Letter quality 360 × 180 dots/inch
(horiz × vert) Correspondence quality 180 × 180 dots/inch
Draft quality 120 × 180 dots/inch
Graphics 360 × 360, 360 × 180, 180 × 180,
120 × 180, 90 × 180, 60 × 180 dots/inch
240 × 72, 120 × 72, 60 × 72 dots/inch
200 × 60, 100 × 60, 90 × 60,
200/3 × 60, 60 × 60, 50 × 60 dots/inch
Character spacing: 2.5, 3, 5, 6, 10, 12, 15, 17.1, 18, and 20 cpi and proportional spacing
Programmable in 1/360-inch and other increments for image graphics
Character expansion: Double or quadruple width and height (control panel or DLMENU)
Multiwidth and height (DPL24C PLUS printer command)
Characters per line:
Characters per inch (cpi)
Characters per line (cpl)
(Character spacing)
DL9300 DL9400
10 80 136
12 96 163
15 120 204
17.1 136 232
18 144 244
20 160 272
3.1.2 Forms feed
Feeding: Continuous forms:
Standard tractor unit installed at front of printer at shipment, but installable at rear of printer
Optional tractor unit installable at rear or front of printer
Cut sheets:
Friction-feed platen (standard)
Cut-sheet feeder (option) installable at rear and front of printer
Note that front and rear tractor units or front and rear cut-sheet feeders can be used at the
same time. However, the front tractor unit cannot be installed with the front cut-sheet
feeder at the same time.
Feed direction: Bidirectional (push-feed tractor)
Line spacing: 1, 2, 3, 4, 5, 6, 7, and 8 lines per inch
Programmable in 1/360-inch and other increments for image graphics
Line feed speed: Less than 60 ms/line (at 6 lines per inch)
Forms feed speed: 6 inches per second
Paper detection: 6 sensors: front paper set, top-of-form, end of paper (front and rear tractors), paper empty
(front and rear CSFs)