Filter
Top Products
4-3
File(F)
Option(O) Help(H)
Menu function 1
Menu function 2
Hardware function
Adjust function
Config function
Key Guide
(Help windows : discribes item Indicated by cursor)
ALT+( ) : Short cut key
Enter :
TAB :
ESC : Cancel
Cursor :
F5 : Cuctum setup
SEND Exit
Menu function 1
FONT : COUR 10
QUALITY : LETTER
PITCH : 10CPI
LINE SP : 6 LPI
CHAR-W : NORMAL
CHAR-H : NORMAL
ATTRIB : NONE
PAGE LG : 11.0IN
COLOR : AUTOSEL
LFT-END : 1 COLM
TOP-MRG : 1 LINE
LANGUGE : USA
CHR-SET : SET 1
AGM : OFF
Table 4.1 Setup functions
Figure 4.2 Main menu of the DLMENU
Function Description
SAVE & END Stores selected options in nonvolatile memory and exits setup mode.
MENU 1 or 2 Selects options for font styles, page format, command compatibility, etc. See the
description below. Two menus enable setting different options for two applications.
HARDWARE Selects options for hardware conditions such as input buffer capacity selection. See
the description below.
ADJUSTMENT Adjusts the top-of-form location where paper is loaded.
CONFIGURATION Defines the printer's primary condition such as tearing off continuous forms.
DEFAULT Restores printer features to their factory defaults.
LIST Prints out currently saved setup options in table form.
SELF-TEST Prints firmware versions and self-test pages.
HEX DUMP Prints received data and commands in hexadecimal.
V-ALIGNMENT Prints vertical bars for aligning printing locations between odd and even lines in
bidirectional printing.
MENU 1 and 2 functions:
Emulation, font style, print quality, character spacing, line spacing, character width, character height,
character attribute, page length, left-end offset, top margin, language, character set, perforation skip, paper
width, zero character typeface, DC1/DC3 code specification, CR code definition, LF code definition, and
right-end auto CR
HARDWARE functions:
Paper-outage detection, print direction, buzzer activation, interface data word length, print data/download
data buffer allocation, parallel interface +5V source pin assignment, interface type, serial data format, baud
rate, protocol, DSR signal control, and duplex mode