Filter
Top Products
5-18
CommandFunction
3.
4.
Vertical control
Line feed
Reverse line feed
Form feed
Advance paper n/180 inch (0 < n < 255)
Reverse paper n/180 inch (0 < n < 255)
Advance paper n/360 inch
(1 < n1 n2 n3 < 999)
n1, n2, and n3 are the hundreds, tens, and ones digits.
Reverse paper n/360 inch
(1 < n1 n2 n3 < 999)
n1, n2, and n3 are the hundreds, tens, and ones digits.
Set line spacing to 1/8 inch (8 lpi)
Set line spacing to n/180 inch
(0 < n < 255)
Set line spacing to 7/60 inch
Set line spacing to n/60 inch
(0 < n < 127)
Set line spacing to 1/6 inch (6 lpi) or to the value preset with the
ESC A command
The preset line spacing command is ESC A (n).
Set line spacing to n/360 inch
(1 < n1 n2 n3 < 999)
n1, n2, and n3 are the hundreds, tens, and ones digits.
Set line spacing to n/360 inch
(1 < n < 255)
Tabulation
Horizontal tab execution
Set horizontal tabs
The values of n1 to nk in this command are the ASCII
values of the print columns (at the current character
width) where tabs are to be set.
(1 < n < 255) (1 < k < 255)
Move to print column n (1 < n < 255)
Move to dot column n/360 inch (n = n1 + n2 × 256)
The value below is for 136-column printers.
(0 < n1 < 255) (0 < n2 < 19)
(0 < (n2 × 256 + n1) < 4895)
Horizontal relative move by n/360 inch
(-999 < n1 n2 n3 < +999)
n1, n2, and n3 are the hundreds, tens and ones digits of
the distance. s is a plus or minus (+ or -) sign.
Vertical tab execution
Set vertical tabs
The values of n1 to nk, etc., in this command are the
ASCII values of the lines (at the current line spacing)
where tabs are to be set.
(1 < n < 255) (1 < k < 64)
Move to line n (1 < n < 255)
LF
ESC LF
FF
ESC J (n)
ESC j (n)
ESC e J (n1) ( n2) ( n3)
ESC e j (n1) (n2) (n3)
ESC 0
ESC 3 (n)
ESC 1
ESC A (n)
ESC 2
ESC e V (n1) (n2) (n3)
FS 3 (n)
HT
ESC D (n1)...(nk) NUL
ESC HT (n)
ESC $ (n1) (n2)
ESC e R (s) (n1) (n2) (n3)
VT
ESC B (n1) ...(nk) NUL
ESC VT (n)