Filter
Top Products
3-4
3.1.4 Forms
Width: Forms type DL9300 DL9400
Continuous forms
102 to 267 mm (4 to 10.5 in.) 102 to 420 mm (4 to 16.5 in.)
Cut sheets (sheet feeder)
102 to 257 mm (4 to 10.1 in.) 102 to 420 mm (4 to 16.5 in.)
Cut sheets (paper table)
55 to 267 mm (2.2 to 10.5 in.) 55 to 420 mm (2.2 to 16.5 in.)
Length: Forms type DL9300 DL9400
Continuous forms 102 mm (4 in.) or more 102 mm (4 in.) or more
Cut sheets (sheet feeder)
70 to 364 mm (2.8 to 14.3 in.) 70 to 420 mm (2.8 to 16.5 in.)
Cut sheets (paper table)
70 to 364 mm (2.8 to 14.3 in.) 70 to 420 mm (2.8 to 16.5 in.)
Thickness: Up to 0.65 mm (0.025 in.)
Thickness control: Automatic print head gap control (manual control possible)
Loading: Autoloading for continuous forms and cut sheets
Parking: Cut sheets are loaded without removing continuous forms from the printer;
continuous forms are unloaded to the parking position and stand by for the next
loading.
Cut-sheet feeder (option): DL9300 DL9400
SF930 SF940
Forms cutting: 25.4-mm (1-in.) margin tear-off
Paper detection: Left and right edges of paper
Top and bottom edges of paper
Feed path: Nearly flat
See Section 3.7 for details on forms specifications.