Filter
Top Products
Device Configuration Commands Command Reference
Intelligent Blade Panel Module
158
7.4.3.2 Configuration Commands
7.4.3.2.1 igmpsnooping
This command enables IGMP Snooping on a Uplink Set. The default value is enabled.
Syntax
igmpsnooping <uplinkSetName>
no igmpsnooping <uplinkSetName>
<uplinkSetName> - The name of a uplink set which the IGMP snooping to be enabled or
disabled.
no - This command disables IGMP Snooping on the specific uplink set.
Default Setting
Disabled
Command Mode
Global Config
7.4.4 Port Channel
7.4.4.1 lacp
This command enables Link Aggregation Control Protocol (LACP) on a port group.
Syntax
Lacp <uplinkSetName>
no lacp <uplinkSetName>
<uplinkSetName> - The name of a uplink set which the LACP to be enabled or disabled.
no - This command disables Link Aggregation Control Protocol (LACP) on a uplink set.
Default Setting
Disable
Command Mode
Global Config