Fujitsu BX600 Server User Manual


 
Management Commands Command Reference
Intelligent Blade Panel Module
174
1518
Command Mode
Interface Config
7.5.1.5 ip address
This command sets the IP Address, and subnet mask. The IP Address and the gateway must
be on the same subnet.
Syntax
ip address <ipaddr> <netmask> [<vlan-id>]
no ip address
<ipaddr> - IP address
<netmask> - Subnet Mask
<vlan-id> - Inband Administration VLAN ID, range is from 1~4094.
no - Restore the default IP address and Subnet Mask
Default Setting
IP address: 0.0.0.0
Subnet Mask: 0.0.0.0
Command Mode
Global Config
Command Usage
Once the IP address is set, the VLAN ID’s value will be assigned to management VLAN.
7.5.1.6 ip default-gateway
This command sets the IP Address of the default gateway.
Syntax
ip default-gateway <gateway>
no ip default-gateway