Filter
Top Products
Security Commands Command Reference
Intelligent Blade Panel Module
248
<1-255> - max timeout (Range: 1 to 255).
<1-3> - The valid value of index is 1, 2, and 3.
no - This command is used to reset the timeout value to the default value.
Default Setting
3
Command Mode
Global Config
7.9.6 Port Security Configuration Commands
7.9.6.1 port-security
This command enables port locking at the system level (Global Config) or port level (Interface
Config).
Syntax
port-security
no port-security
Default Setting
None
Command Mode
Global Config, Interface Config
7.9.6.2 port-security max-dynamic
This command sets the maximum of dynamically locked MAC addresses allowed on a specific
port.