Filter
Top Products
Security Commands Command Reference
Intelligent Blade Panel Module
235
7.9.3.3 dot1x login
This command assigns the specified authentication login list to the specified user for 802.1x
port security. The <user> parameter must be a configured user and the <listname> parameter
must be a configured authentication login list.
Syntax
dot1x login <user> <listname>
<user> - is the login user name.
<listname> - an authentication login list.
Default Setting
None
Command Mode
Global Config
7.9.3.4 dot1x system-auth-control
This command is used to enable the dot1x authentication support on the IBP. By default, the
authentication support is disabled. While disabled, the dot1x configuration is retained and can
be changed, but is not activated.
Syntax
dot1x system-auth-control
no dot1x system-auth-control
no - This command is used to disable the dot1x authentication support on the IBP.
Default Setting
Disabled
Command Mode
Global Config