Filter
Top Products
Panel Settings Menu
Web-Based Management Interface
Intelligent Blade Panel Module
67
6.2.2.1.5 Configuring Outbound Telnet Client Configuration Page
Configurable Data
Admin Mode - Specifies if the Outbound Telnet service is Enabled or Disabled. Default
value is Enabled.
Maximum Sessions - Specifies the maximum number of Outbound Telnet Sessions
allowed. Default value is 5. Valid Range is (0 to 5).
Session Timeout - Specifies the Outbound Telnet login inactivity timeout. Default value
is 5. Valid Range is (1 to 160).
Command Buttons
Submit - Sends the updated configuration to the IBP module. Configuration changes
take effect immediately.