Filter
Top Products
Security Menu
Web-Based Management Interface
Intelligent Blade Panel Module
98
6.2.3.4 Defining Secure Shell Configuration
6.2.3.4.1 Configuring Secure Shell Configuration Page
Configurable Data
Admin Mode - This select field is used to Enable or Disable the administrative mode of
SSH. The currently configured value is shown when the web page is displayed. The
default value is Disable.
SSH Version 1 - This select field is used to Enable or Disable Protocol Level 1 for SSH.
The currently configured value is shown when the web page is displayed. The default
value is Enable.
SSH Version 2 - This select field is used to Enable or Disable Protocol Level 2 for SSH.
The currently configured value is shown when the web page is displayed. The default
value is Enable.
Maximum Number of SSH Sessions Allowed - This select field is used to configure the
maximum number of inbound SSH sessions allowed on the IBP. The currently configured
value is shown when the web page is displayed. The range of acceptable values for this
field is (0-5).
SSH Session Timeout (Minutes) - This text field is used to configure the inactivity
timeout value for incoming SSH sessions to the IBP. The acceptable range for this value
is (1-160) minutes.
Non-Configurable Data
SSH Connections in Use - Displays the number of SSH connections currently in use in
the system.
Command Buttons
Submit - Send the updated screen to the IBP. Changes take effect on the IBP but these
changes will not be retained across a power cycle unless a save is performed.
Download Host Keys - Link to the File Transfer page for the Host Key download. Note
that to download SSH key files SSH must be administratively disabled and there can be
no active SSH sessions.