Filter
Top Products
Features of the IBP Module Introduction
Intelligent Blade Panel Module
20
can be automatically set if this feature is also supported by the attached device. Otherwise,
these items can be manually configured for any connection.
Note – Auto-negotiation must be enabled for automatic MDI/MDI-X pin-out configuration.
Internal Ports
The IBP also includes 30 internal 1000BASE-X Gigabit Ethernet ports that connect to the
server blades in the chassis. These ports are fixed at 1000 Mbps, full duplex. The internal ports
are named g1 – g30 in the configuration interface. The 30 internal ports connect with server
blade as following diagram.