Fujitsu BX600 Server User Manual


 
Management Commands Command Reference
Intelligent Blade Panel Module
190
<name> - community name (up to 16 case-sensitive characters).
no - This command removes this community name from the table. The name is the
community name to be deleted.
Default Setting
Two default community names: public and private. You can replace these default community
names with unique identifiers for each community. The default values for the remaining four
community names are blank.
Command Mode
Global Config
This command activates an SNMP community. If a community is enabled, an SNMP manager
associated with this community manages the IBP according to its access right. If the
community is disabled, no SNMP requests using this community are accepted. In this case the
SNMP manager associated with this community cannot manage the IBP until the Status is
changed back to Enable.
Syntax
snmp-server community mode <name>
no snmp-server community mode <name>
<name> - community name.
no - This command deactivates an SNMP community. If the community is disabled, no
SNMP requests using this community are accepted. In this case the SNMP manager
associated with this community cannot manage the IBP until the Status is changed back to
Enable.
Default Setting
The default public and private communities are enabled by default. The four undefined
communities are disabled by default.
Command Mode
Global Config