Fujitsu S1500M Scanner User Manual


 
How to Perform a Scan (for Mac OS Users)
196
8. Press the [Scan] button on the ScanSnap.
Scanning is started.
The [Scan] button on the ScanSnap blinks blue during the scanning operation.
The following window appears to indicate the scanning status.
When the scanning is complete, the Quick Menu appears.
By default, the [Scan] button settings are set to [Duplex Scan (Double-sided)].
With ScanSnap Manager, you can switch the [Scan] button settings to [Simplex Scan
(Single-sided)] mode. For details, refer to "Changing Scanning Settings" (page 203).
Scanning can also be started from the ScanSnap Manager menu.
For details, refer to "ScanSnap Manager Menu" (page 190).
Do not connect or disconnect the ScanSnap and other USB devices during the scan-
ning operation.
Do not close the ADF paper chute (cover) during the scanning operation.
Do not switch users during the scanning operation.