Filter
Top Products
198 • Appendices DMC-2X00
Erasing Display
ESC E Clear Display and Home
ESC I Clear Display
ESC J Cursor to End of Display
ESC K Cursor to End of Line
ESC M Line Containing Cursor
Sounds
ESC T Short Bell
ESC L Long Bell
ESC P Click
ESC Q Alert
Cursor Style
ESC F Underscore Cursor On
ESC G Underscore Cursor Off
ESC R Blinking Cursor On
ESC S Blinking Cursor Off
Key Clicks (audible sounds from terminal)
ESC U Key Click Enable
ESC V Key Click Disable
Identify (sends “TT!” then terminal firmware version)
ESC Z Send Terminal ID
Cursor Position
ESC Y Pr Pc
In the above sequence, Pr is the row number and Pc is the column number of the target cursor location.
These parameters are formed by adding hexadecimal 1F to the row and column numbers. Row and
column numbers are absolute, with row 1, column 1 (Pr = H20, Pc = H20) representing the upper left
corner of the display.
Configuration
<CNTRL><SHIFT>F1 Allows user to configure terminal; Follow prompts on display to change
configuration