Filter
Top Products
Error messages 121
Not enough memory Close all programs that are not currently in
use.
Print queue is full Wait until the current print job has completed
before sending another print job.
If you receive this error often, you need to add
memory to the printer.
Printer is out of paper Add paper to the printer.
Make sure that the printer is online.
Required parameter
missing
Make sure that you entered the right
command.
If you are trying to exit MS-DOS to return to
Windows, type exit, then press E
NTER.
Syntax error Make sure that you entered the right
command.
If you are trying to exit MS-DOS to return to
Windows, type exit, then press E
NTER.
Time and date not set Open the BIOS Setup utility, then set the
system date and time.
Write protect error Move the write-protection tab over the hole on
the back of the diskette.
Error message Solutions
8505945.book Page 121 Thursday, March 9, 2000 2:13 PM