Filter
Top Products
Processors 57
4
Align the new processor with the processor slot. Note that the processor
slot is keyed so the processor can only be installed one way. Press it firmly
to install it.
5 Connect the processor fan cable to the second processor fan connector
on the system board (See “System board” on page 8 for location).
6 Close the case. (See “Closing the case” on page 27.)
7 Reconnect the power cord and all other cords you removed, then turn
on the system.
Important Gateway recommends that you run a processor retest from
the BIOS Setup utility whenever you replace or add a
processor.
8505945.book Page 57 Thursday, March 9, 2000 2:13 PM