Filter
Top Products
64 Replacing and Adding Internal Devices
8 Once the card is securely placed, slide the card guide release tab down
again (for full-length expansion cards) and press the expansion card
retention clip through the back panel until it clicks into place to secure
the card.
9 Connect any cables to the card (see card documentation for proper cable
orientation).
10 Close the case. (See “Closing the case” on page 27.)
11 Reconnect the peripherals and the power cord, then turn on the system.
You may need to reconfigure the server after installing some expansion cards.
You may also need to install software that came with the card. Check the card
documentation for additional information.
Expansion card
retention clip
Card guide
release tab
8505945.book Page 64 Thursday, March 9, 2000 2:13 PM