Filter
Top Products
Drives 41
11
Run any necessary utilities to inform the system that the new drive is
installed and ready for use. See the utility software documentation for
details.
Adding a hot-plug drive
The hot-plug drives are located at the bottom of the front panel. The hot-plug
bay supports up to six 1-inch high 3.5-inch SCA LVD SCSI hard drives.
The hot-plug drives are assigned SCSI ID numbers by the hot-plug backplane
with the drive at the far left side of the hot-plug bay assigned SCSI ID 0. The
backplane assigns SCSI IDs to the other drives in order up to SCSI ID 5 at the
far right side of the hot-plug bay.
Install drive in the left-most drive bay first and in increasing order by SCSI
ID number thereafter.
SCSI ID 0
SCSI ID 1
SCSI ID 2
SCSI ID 3
SCSI ID 4
SCSI ID 5
8505945.book Page 41 Thursday, March 9, 2000 2:13 PM