Filter
Top Products
60 Replacing and Adding Internal Devices
■ Turn off the computer, remove the cover, and make sure that all cables
inside the case are attached securely. Also, make sure that the colored
cable edges are aligned correctly and that the connectors did not miss
any pins. Disconnect and reconnect the cables. Close the case as described
in “Closing the case” on page 27, reconnect the modem and power cords,
then turn on the computer.
■ Turn off the computer, remove the cover and, if you have the proper test
equipment, make sure that the new battery has power. (Although
unlikely, your new battery may be defective.) Close the case as described
in “Closing the case” on page 27, reconnect the power cord, then turn
on the computer.
8505945.book Page 60 Thursday, March 9, 2000 2:13 PM