Filter
Top Products
96
Reduce Vertical Slew
N: Forward and reverse vertical slew occurs at full speed.
Y: Forward and reverse vertical slew occurs at half speed.
For heavier multipart forms or for label stock, you may select REDUCE SLEW (Y).
SPEC: REDUCE SLEW
ENTER
SPEC:RED SLEW>N
↓
SPEC:RED SLEW:Y
↓
Labels
Y: Inhibits a backward motion, inhibits tear off and parks in forward direction. In order to
prevent reverse feeding (and thus reduce chance of label peeling), you may select
LABELS:Y.
N: Sets normal operation.
SPEC: LABELS
ENTER
SPEC:LABELS>N
↓
SPEC:LABELS:Y
↓
Text Direction
BI: All text print modes are printed in bid-directional mode.
UNI: All text print modes are printed uni-directional mode. In order to obtain even higher
line-to-line character alignment, you may select uni-directional (UNI) text mode.
SPEC: TEXT DIRECT
ENTER
SPEC:TEXT>BI
↓
SPEC:TEXT:UNI
↓