Filter
Top Products
112
6. Match the left tractor set with the ninth mark on the support and lock it in place moving the
lever up. Adjust the right tractor set gently to remove slack from the paper and lock it in
place moving the lever up.
9
Make sure the paper is not taut.
7. Close the Front tractor assemblies cover.
To select the Front1 Push paper path, press the
PATH
key until the
Front 1
led is turned on. The
paper will load automatically to the first print line position.
If paper does not load automatically, then press the
LOAD/FF
key and the LCD displays:
LOAD PAPR: FRONT1