Filter
Top Products
62
Selecting Parallel Interface Options
Select the parallel interface options as shown below.
PARALLEL OPTIONS
To change the parallel interface options, press the
ENTER
key to go from the top level to
the second level as shown below. There are 10 options that can be specified:
Auto Feed External (AFXT) Signal
The printer will or will not respond to the AFXT signal on the parallel interface.
If AFXT is enabled response (Y), then upon receipt of a CR from the host, the printer will
also execute a line feed provided the AFXT signal is low.
If AFXT is not enabled response (N), then the printer will only execute a carriage return
upon receipt of a CR code.
PARALLEL OPTIONS
ENTER
PAR: AFXT
ENTER
PAR:AFXT>N
↓
PAR:AFXT:Y
↓
Select-in Signal
The printer will or will not respond to the Select-in signal of the parallel interface.
If response to the Select-in signal (Y) is enabled and the Select-in signal is high at power
on, then the printer will receive data normally. Conversely, if the signal is low at power
on, then the printer will ignore received data.
If response to the Select-in signal (N) is not enabled, then the printer will receive data
normally regardless of the condition of the signal.
PAR: SLCT-IN
ENTER
PAR:SLCT-IN>N
↓
PAR:SLCT-IN:Y
↓