Filter
Top Products
68
ETX/ACK Protocol
When set to Y, the EXT/ACK protocol is enabled. This protocol is used to verify the receipt
of blocks of data sent from the host to the computer.
SER: ETX/ACK
ENTER
SER:EXT/ACK>N
↓
SER:EXT/ACK:Y
↓
Robust Xon
Y
: When enabled, the printer will output DC1 when buffer is empty and printer is on line.
N: Disables this function.
SER: ROBUST XON
ENTER
SER:ROBST XON>Y
↓
SER:ROBST XON:N
↓
XON/XOFF Status
BUFF:
Reflects buffer status only.
FAULT:
Reflects fault status only.
ON/BU
: Reflects online and buffer status.
FA/BU
: Reflects fault and buffer status.
NONE
: Never output or never change from static state
ONLN
: Reflects online status only.
SER: XON/XOF STAT
ENTER
SER:XONXOF>BUFF
↓
SER:XONXOF:FAULT
↓
SER:XONXOF:ON/BU
↓
SER:XONXOF:FA/BU
↓
SER:XONXOF: NONE
↓
SER:XONXOF: ONLN
↓