Filter
Top Products
14-6 Notes and sketches
To import a
graphics variable
You can copy the contents of a graphics variable into the
Sketch view of an aplet.
1. Open the Sketch view of the aplet (>6+,)7@SKETCH). The
graphic will be copied here.
2. Press >9$56@,
. Highlight Graphic, then press *A,
and highlight the name of the variable (G1, etc.).
3. Press to recall the contents of the graphics
variable.
4. Move the box to where you would like to copy the
graphic, then press
.
The notepad
Subject to available memory, you can store as many notes as
you want in the Notepad (>6+,)7@
NOTEPAD). These notes are
independent of any aplet. The Notepad catalog lists the
existing entries by name. It does not include notes that were
created in aplets’ Note views, but these can be imported. See
“To import a note” on page 14-8.
To create a note
in the Notepad
1. .Display the Notepad
catalog.
>6+,)7@
NOTEPAD
2. Create a new note.
3. Enter a name for your
note.
MYNOTE
Note: In this example,
the name of the note is ‘MYNOTE’.