Filter
Top Products
Programming 21-15
options use, or the program that defines the aplet’s
VIEWS menu.
• You can include a “Start” option in the VIEWS menu
to specify a program that you want to run
automatically when the aplet starts. This program
typically sets up the aplet’s initial configuration. The
START option on the menu is also useful for resetting
the aplet.
Command syntax
The syntax for the command is as follows:
SETVIEWS
"Prompt1";"ProgramName1";ViewNumber1;
"Prompt2";"ProgramName2";ViewNumber2:
(You can repeat as many Prompt/ProgramName/
ViewNumber trios of arguments as you like.)
Within each Prompt/ProgramName/ViewNumber trio,
you separate each item with a semi-colon.
Prompt
Prompt is the text that is displayed for the corresponding
entry in the Views menu. Enclose the prompt text in
double quotes.
Associating programs with your aplet
If Prompt consists of a single space, then no entry appears
in the view menu. The program specified in the
ProgramName item is associated with the aplet and
transferred whenever the aplet is transmitted. Typically,
you do this if you want to transfer the Setviews program
with the aplet, or you want to transfer a sub-program that
other menu programs use.
Auto-run programs
If the Prompt item is “Start”, then the ProgramName
program runs whenever you start the aplet. This is useful
for setting up a program to configure the aplet. Users can
select the Start item from the VIEWS menu to reset the
aplet if they change configurations.
You can also define a menu item called “Reset” which is
auto-run if the user chooses the button in the APLET
view.
hp40g+.book Page 15 Friday, December 9, 2005 1:03 AM