Filter
Top Products
Replacing the Floppy Drive
59
Replacing the Floppy Drive
1 Switch off the PC and remove the PC’s main cover. Refer to page 49.
2 Remove the PC’s front panel. Refer to page 54.
3 Remove the floppy drive’s two connectors.
4 Remove the floppy drive fixing screw.
5 Pull firmly on the floppy drive tray to release it from its retaining clip,
and slide the tray out through the PC’s front panel.
6 Slide the new drive into the floppy drive bay until it clicks in place.
7 Replace the screw.
8 Replace the floppy drive connectors.
9 Replace the front panel. Refer to page 54.
10 Replace the main cover. Refer to page 49.
Note
If the PC does not start properly, you may have reconnected the status panel connector
wrongly. Remove the front panel and check the connection of the cable.