HP (Hewlett-Packard) BrioBA410 Personal Computer User Manual


 
Replacing the Battery
69
Replacing the Battery
WARNING
There is a danger of explosion if the battery is incorrectly installed. For your safety,
never attempt to recharge, disassemble or burn the old battery. Replace the battery
only with the same or equivalent type recommended by the manufacturer. Thebattery
in this PC is a lithium battery which does not contain heavy metals, nevertheless, in
order to protect the environment, do not dispose of batteries in household waste.
Please return used batteries to the shop from which you bought them, or to the dealer
from which you purchased your PC, or to HP, so that they can either be recycled or
disposedof inan environmentallysoundway. Returnedused batterieswill beaccepted
free of charge.
1 Switch off the PC and remove the PC’s main cover (refer to page 49).
2 Lay the PC on its side.
3 Remove the power supply unit to gain better access to the inside of the
PC (refer to page 51).
4 Remove the old battery by pressing the retaining clip with a flat-headed
screwdriver and lifting the battery clear of the battery holder.
5 Place the new battery in the battery holder, with the “+” sign on top and
ensure that it is properly seated.
6 Replace the power supply unit.
7 Replace the PC’s main cover. Refer to page 54.
Position of battery