Filter
Top Products
Replacing the Hard Drive
60
Repairing Your e-Vectra
Replacing the Hard Drive
For information on recovering the contents of your old hard drive, refer to
“HP Brio Assist CD-ROM” on page 43.
WARNING
For your safety, disconnect the power cord and all external cables.
1 Switch off the PC and remove the PC’s main cover. Refer to page 49.
2 Lay the PC on its side.
3 Remove the power supply unit to gain better access to the inside of the
PC (refer to page 51).
4 Loosen the two thumb screws that hold the hard drive in place.
Caution
Take care when handling the hard drive. A small drop can damage it.
5 Press firmly downwards on the hard drive and tilt it away from the hard
drive tray until it can be lifted out. Hold the drive tray firmly so as not
to drop it.
6 Remove the hard drive’s data and power cables.
➄
➄➄
➄
➅
➅➅
➅
➃
➃➃
➃