Filter
Top Products
3-80 Troubleshooting Analysis Guide (TAGs)
3
Turn the printer off.
• Disconnect J/P330.
• Turn the printer on.
• Check J/P8-6 for +12 Vdc.
No: Is the voltage +12 Vdc?
No: Continue.
Yes: Go to #35 in this TAG.
4
Turn the printer off.
• Disconnect J/P32.
• Turn the printer on.
• Check J/P8-6 for +12 Vdc.
Is the voltage +12 Vdc?
No: Go to #8 in this TAG.
Yes: Continue.
5
Turn the printer off.
• Reconnect J/P32.
• Disconnect J/P74.
• Turn the printer on.
• Check J/P8-6 for +12 Vdc.
Is the voltage +12 Vdc?
No: Replace the IGS board, then turn to TAG 002: Check & Problem Resolution.
Yes: Continue.
6
Does the printer have an attachment option?
No: Replace the signal interface board, then turn to TAG 002: Check & Problem Resolution.
Yes: Continue.
7
Turn the printer off.
• Reconnect J/P74.
• Disconnect the DC cable (J/P73) for the attachment option.
• Check J/P8-6 for +12 Vdc.
Is the voltage +12 Vdc?
No: Replace the signal interface board, then turn to TAG 002: Check & Problem Resolution.
Yes: Replace the attachment option, then turn to TAG 002: Check & Problem Resolution.