Filter
Top Products
Introduction
9-10 General Printer Maintenance
This reveals the pick pressure adjusters, illustrated in Figure 9-3, Paper Pick Pressure
Adjusters, below:
Figure 9-3. Paper Pick Pressure Adjusters
3 To adjust paper pick tension for the upper cassette, identify the adjuster corresponding
to that cassette, then:
• To decrease the pressure, correcting multiple feeds: loosen the screws, pivot the
adjuster up, and tighten the screws.
• To increase the pressure, easing the paper feed: loosen the screws, pivot the
adjuster down, and tighten the screws.
4 To adjust paper pick tension for the lower cassette, identify the adjuster corresponding
to that cassette, then:
• To decrease the pressure, correcting multiple feeds: loosen the screws, pivot the
adjuster down, and tighten the screws.
• To increase the pressure, easing the paper feed: loosen the screws, pivot the
adjuster up, and tighten the screws.
5 Test the adjustments by closing the front cover and sending paper through the printer.
You may need to adjust the lever several times (repeating Steps 3 or 4, and 5) before
the pressure is set properly.
6 When the tension is set properly, reinstall the cassette release cover and close the
printer’s front cover.