Introduction
General Printer Maintenance 9-19
Figure 9-8. Tune-Up Kit Components
7 Replace the component assemblies in this order:
• Paper timing roller
• Exit roller
• Upper pick up roller
• Lower pick up roller
• Upper feed roller
• Lower feed roller
• Transfer charger
• Lower static brush
• Upper static brush
• Upper paper guide roller
8 Perform the every-call cleaning procedure on page 7-6.
9 Plug in the printer and turn it on.
10 Run test prints to ensure that the paper feeds correctly through the printer.
11 Fill in the label with the date and meter count. Affix it inside the front cover next to
the printer’s serial number.