Filter
Top Products
Removal
7-4 Removal/Replacement Procedures
Removal
This section includes step-by-step instructions for removing all field service replaceable
parts in the printer. Each part is addressed under its own heading, as outlined on the pre-
ceding contents pages. Most of the procedures are applicable to both the simplex and
duplex printer models. When the procedures differ between the two printers, the word
simplex or duplex is included in parentheses.
Before You Begin
To remove a part, follow the instructions provided. To replace a part, follow the steps in
reverse order unless otherwise noted. During reassembly, make sure to reconnect all con-
nectors properly and seat gears and other moving parts properly.
Power Considerations
Before removing a part, make sure the printer is turned off and that the power cord is dis-
connected.
Photoconductor Removal
If it is necessary to remove the photoconductor unit as part of a removal procedure, make
sure to place it in its protective packaging.