Filter
Top Products
142 Chapter4
Field Replaceable Units
FRU Removal and Replacement
4. For ease in installation of additional memory the hard disk drive fan may need to be
removed. See the section “Removing the Fan from the Hard Disk Drive Area” on page
110 in this chapter.
5. Load the DIMM cards in the slots using the loading sequence provided in Figure 4-56.
Figure 4-56. DIMM Card Slot Numbers and Loading Sequence
NOTE
When installing DIMMs, you need to orient the notches on the bottom edge of
the DIMM card so that they are aligned with the keys on the DIMM
connector. See Figure 4-57. The keyed DIMM connectors prevent you from
installing the DIMM cards backwards.
6. Press downward on the ejector tabs located on both sides of the DIMM connector. See
Figure 4-57. This opens the connector for DIMM card insertion.
Disk/Memory
Fan