Filter
Top Products
44 Chapter2
Configuration
FRU Configurations
The B1000/C3000 workstation supports the 128 MByte DIMMs or the 256 MByte DIMMs.
If users install different size memory boards in a single unit, the largest size must be
loaded first then the smaller capacity memory boards for maximum performance. For
example, load a 256 MByte DIMM in slot 0 and a 128 MByte DIMM in slot 1.
NOTE
Users who wish to achieve both maximum performance and maximum future
capacity are advised to use 256 MB boards exclusively.
See the section titled “DIMM Cards” on page 141 for details on installing memory. Also,
note that there is a label on the floor of the workstation’s interior showing the
B1000/C3000 memory loading order.
Use the Boot Console Handler to verify that the workstation recognizes the installed
memory. See “Displaying the Current Memory Configuration” on page 175 of this manual.