Filter
Top Products
To find out the device address of the product
1. On the Home Screen, touch the right arrow to view more options.
2. Touch Setup.
3. Touch Bluetooth.
NOTE: It is required that the Bluetooth Radio is turned on to enable the
Bluetooth options in the Bluetooth menu.
4. Touch Device Address.
The Device Address appears, which is read only.
5. Make a note of the device address. You might need it later.
For information on printing to the HP Photosmart from Bluetooth devices using a
Bluetooth connection, see:
•“
Connect the HP Photosmart to a computer using a Bluetooth® wireless
connection” on page 68
•“
Connect the HP Photosmart to other Bluetooth devices using a Bluetooth® wireless
connection” on page 70
Connect the HP Photosmart to a computer using a Bluetooth
®
wireless
connection
A Bluetooth connection provides a quick and easy way to print images from a Bluetooth-
enabled computer without using a cable. With a Bluetooth connection you can access
many of the same printing features as with a USB connection. For example, you can
check the printer status, as well as the estimated amount of ink remaining in your ink
cartridges.
NOTE: The only software functionality available with a Bluetooth connection is
printing. Scanning and software-based copying cannot be done over a Bluetooth
connection.
You must have Windows Vista or Windows XP and either the Microsoft Bluetooth
®
Protocol Stack or the Widcomm Bluetooth
®
Protocol Stack installed in order to connect
the HP Photosmart. It is possible to have both the Microsoft Stack and the Widcomm
Stack on your computer, but you use only one of them to connect the product.
Chapter 10
68 Network setup
Network setup