Pickup roller, separation roller, and feed roller (1 x 500-sheet and
3 x 500-sheet paper feeders)
CAUTION: Do not touch the spongy roller surface unless you are replacing the roller. Skin oils on the
roller can cause paper pickup problems.
TIP: You do not have to separate the product from the feeder to remove these rollers.
1. Remove the Tray 3 or Tray 4/5/6 cassette from the product, and then locate the rollers on the
right-hand side of the tray cavity.
Figure 2-15 Remove the 1 x 500 or 3 x 500 rollers (1 of 2)
ENWW
Removal and replacement procedures
99