Filter
Top Products
Replace supplies
Description
This alert appears only if the product is configured to stop when a supplies reach the very low
threshold. Two or more supplies have reached the estimated end of life. The product indicates when a
supply level is at its estimated end of life. The actual life remaining might be different than estimated.
The supply does not need to be replaced now unless the print quality is no longer acceptable.
HP recommends that the customer have a replacement supply available to install when print quality is
no longer acceptable.
NOTE: When an HP supply has reached its approximated end of life, the HP Premium Protection
Warranty on that supply ends.
Recorded event codes depend on which supplies are at the end of life.
◦
10.00.70 (event code)
Black print cartridge
◦
10.01.70 (event code)
Cyan print cartridge
◦
10.02.70 (event code)
Magenta print cartridge
◦
10.03.70 (event code)
Yellow print cartridge
◦
10.23.70 (event code)
Fuser Kit
◦
10.31.70 (event code)
Toner collection unit
◦
10.22.70 (event code)
Transfer kit
Recommended action
Press the OK button to find out which supplies need to be replaced.
Or, configure the product to continue printing by using the Manage Supplies menu.
Restore Factory Settings
Description
The product is restoring factory settings.
484 Chapter 3 Solve problems ENWW