Tray 5 feed sensor - SR81
◦
13.A6.FF (event code)
Tray 6 feed sensor - SR91
◦
13.FF.FF (event code)
Multiple sensors
Recommended action
Clear the jam. See the clear jams section in the service manual.
13.WX.YZ Fuser area jam
Description
◦
13.B9.AZ (event code)
Stopped at fuser jam
This jam occurs when the paper stays at the fuser output sensor for a designated amount of time
after it has reached the fuser output sensor.
Z = fuser mode
●
1 = Normal auto sense
●
2 = Normal non-auto sense
●
3 = Light 1 to 3
●
4 = Heavy 1
●
5 = Heavy 2
●
6 = Heavy 3
●
7 = Glossy 1
●
8 = Glossy 2
●
9 = Glossy 3
●
A = Glossy film
●
B = Transparency
●
C = Label
●
D = Envelope 1 to 3
420 Chapter 3 Solve problems ENWW