Filter
Top Products
Retrieve From USB Settings menu
Table 3-34 Retrieve From USB Settings menu
First level Second level Values Description
Retrieve From USB Settings Enable
Disable*
Configure this setting to allow
Walk-up USB printing at the
control panel.
Print Settings menu
In the following table, asterisks (*) indicate the factory default setting.
Table 3-35 Print Settings menu
First level Second level Values Description
Manual Feed Enabled
Disabled*
Setting this option to On makes
Manual Feed the default for
jobs that do not select a tray. The
Autoselect option in the printer
driver overrides this option.
Courier Font Regular*
Dark
Allows you to select a version of
the Courier font.
The Dark setting is an internal
Courier font available on HP
LaserJet Series III printers and
older.
Wide A4 Enabled
Disabled*
Allows you to change the
printable area of A4 paper. If
you select Disabled, the printable
area is seventy-eight 10-pitch
characters on a single line. If you
select Enabled, the printable
area is eighty 10-pitch
characters on a single line.
Print PS Errors Enabled
Disabled*
Allows you to select to print PS
error pages.
Print PDF Errors Enabled
Disabled*
Allows you to select to print PDF
error pages.
Personality Auto*
PCL
POSTSCRIPT
PDF
Sets the default personality to
automatic switching, PCL, PDF,
or POSTSCRIPT modes.
PCL Form Length Range: 5 – 128
Default = 60
Allows you to set the Form
Length
380 Chapter 3 Solve problems ENWW