●
B = Transparency
●
C = Label
●
D = Envelope 1 to 3
●
E = Rough
●
0 = Photo 1 to 3
Recommended action
Clear the jam. See the clear jams section in the service manual.
13.WX.YZ Jam below control panel
Description
◦
13.B2.9Z (event code)
Page at duplex switchback jam.
Z = the source tray number
Recommended action
Check the product for a jam. See the clear jams section in the service manual.
13.WX.YZ Jam in lower right door
Description
◦
13.A3.D5 (event code)
Late to path jam from Tray 5
This jam occurs when the paper does not reach the Tray 3 feed sensor (SR1) in designated amount
of time after the Tray 5 feed sensor (SR81) sensed the leading edge.
◦
13.A4.D5 (event code)
Late to path jam from Tray 5
This jam occurs when the paper does not reach the Tray 4 feed sensor (SR1) in designated amount
of time after the Tray 5 feed sensor (SR81) sensed the leading edge.
◦
13.A5.A5 (event code)
Stopped at tray path jam, from Tray 5
◦
13.A3.D6 (event code)
Late to path jam from Tray 6
422 Chapter 3 Solve problems ENWW