Filter
Top Products
Table 3-41 Embedded Jetdirect (continued)
First level Second level Third level Fourth level Fifth level Values Description
Reset
Security
Yes
No*
Specify whether the current
security settings on the print
server will be saved or reset to
factory defaults.
Yes: Security settings are reset
to factory defaults.
No: The current security
settings are maintained.
Diagnostics Embedded
Test
LAN HW Test Yes
No*
This menu provides tests to help
diagnose network hardware or
TCP/IP network connection
problems.
Embedded tests help to identify
whether a network fault is
internal or external to the
product. Use an embedded test
to check hardware and
communication paths on the
print server. After you select
and enable a test and set the
execution time, you must select
Execute to initiate the test.
Depending on the execution
time, a selected test runs
continuously until either the
product is turned off, or an
error occurs and a diagnostic
page is printed.
Running this embedded test will
erase your TCP/IP
configuration.
This test performs an internal
loopback test. An internal
loopback test will send and
receive packets only on the
internal network hardware.
There are no external
transmissions on your network.
Select Yes to choose this test,
or No to not choose it.
HTTP Test Yes
No*
This test checks operation of
HTTP by retrieving predefined
pages from the product, and
tests the embedded Web
server.
Select Yes to choose this test,
or No to not choose it.
396 Chapter 3 Solve problems ENWW