3. Disconnect one connector (callout 1), remove three screws (callout 2), and then remove the
residual toner full sensor assembly (callout 3).
CAUTION: During the removal process, make sure that the white gear (callout 4) does not fall
out of the assembly. The white gear might stay on the product, and not come off with the
assembly.
Figure 2-80 Remove the residual toner full sensor (3 of 4)
11
2
3
Figure 2-81 Remove the residual toner full sensor (4 of 4)
4
154 Chapter 2 Removal and replacement ENWW