Table 3-41 Embedded Jetdirect (continued)
First level Second level Third level Fourth level Fifth level Values Description
DHCP Renew Yes
No*
This menu appears if Config
Method is set to DHCP and a
DHCP lease for the print server
exists.
No: The print server does not
request to renew the DHCP
lease.
Yes: The print server requests
to renew the current DHCP
lease.
Primary DNS Range: 0 – 255
Default =
xxx.xxx.xx.
xx
Specify the IP address (n.n.n.n)
of a Primary DNS Server.
Secondary
DNS
Range: 0 – 255
Default =
0.0.0.0
Specify the IP address (n.n.n.n)
of a Secondary Domain Name
System (DNS) Server.
IPv6 Settings Enable On*
Off
Use this item to enable or
disable IPv6 operation on the
print server.
Off: IPv6 is disabled.
On: IPv6 is enabled.
Address Manual
Settings
Enable On
Off*
Use this item to enable and
manually configure a TCP/IPv6
address.
Enable: Choose On to enable
manual configuration, or Off
to disable manual
configuration. The default is
Off.
Address Select from a
provided list.
Address: Use this item to type
a 32 hexadecimal digit IPv6
node address that uses the
colon hexadecimal syntax.
ENWW
Tools for troubleshooting
393