Table 3-41 Embedded Jetdirect (continued)
First level Second level Third level Fourth level Fifth level Values Description
Percent Lost Default = 000 Shows the percent (0 to 100)
of ping test packets that were
sent with no response from the
remote host since the most
recent test was initiated or
completed. The default is 0.
RTT Min Default = 0000 Shows the minimum detected
roundtrip-time (RTT), from 0 to
4096 milliseconds, for packet
transmission and response. The
default is 0.
RTT Max Default = 0000 Shows the maximum detected
roundtrip-time (RTT), from 0 to
4096 milliseconds, for packet
transmission and response. The
default is 0.
RTT Average Default = 0000 Shows the average round-trip-
time (RTT), from 0 to 4096
milliseconds, for packet
transmission and response. The
default is 0.
Ping In
Progress
Yes
No*
Shows whether a ping test is in
progress. Yes indicates a test
in progress, and No indicates
that a test completed or was
not run.
ENWW
Tools for troubleshooting
399