Table 3-42 Troubleshooting menu (continued)
First level Second level Third level Fourth level Values Description
Component Test Select from a list of
available
components.
Use this feature to
exercise individual
parts independently
to isolate noise,
leaking, or other
issues.
To start the test,
select a component.
The test runs the
number of times
specified by the
Repeat option.
You might be
prompted to remove
parts from the
product during the
test. Press the Stop
button to abort the
test.
Repeat Off*
On
The test will run the
number of times
specified by the
Repeat option.
Print/Stop Test Isolates print quality
faults more
accurately by
stopping the product
in mid-print cycle,
which allows you to
see where the image
begins to degrade.
This causes a jam
message that might
need to be manually
cleared. A service
representative should
perform this test.
Retrieve
Diagnostic Data
Export to USB Stores product
diagnostic data on a
portable storage
device.
This function is for
the HP lab use to
troubleshoot and
diagnose system
failures.
404 Chapter 3 Solve problems ENWW