EN Changing general default settings 41
Changing the language on the display panel
Use this procedure to have the control panel display messages and
reports in a language other than the default for your country.
To change the language on the display panel
1 Press ENTER/MENU.
2 Use the < and > keys to select
Common Settings, and then
press E
NTER/MENU.
3 Use the < and > keys to select
Language, and the press ENTER/
M
ENU.
4 Use the < and > keys to select the language you want.
5 Press E
NTER/MENU to save your selection.
Restoring factory defaults
This procedure returns all settings to the factory defaults and clears
the fax header name and phone number. (See “Changing the
information in the fax header” on page 79 for information on how to
add your information to the fax header.) This procedure does not
clear fax numbers and names associated with one-touch keys and
speed-dial codes or delete any pages stored in memory.
To restore factory defaults
1 Press ENTER/MENU.
2 Use the < or > key to select
SERVICE, and then press ENTER/
M
ENU.
3 Use the < or > key to select
RESTORE DEFAULTS, press ENTER/
M
ENU, and then press ENTER/MENU again to confirm your
selection.
